When you log in, please go to configuration–System–System Settings–Menu Output, and you can change the VGA/HDMI resolution, you can try all of these resolutions that have been listed.The user name is admin and the password is your system‘s password. Please input the system IP address into the IE browser.After download it, you can click refresh to search the IP of DVR/NVR.Please download this search tool SADP on your computer to search the IP of your DVR/NVR.Then, you need to connect your computer to the same router with the DVR wired or wirelessly.Firstly, please connect your DVR/NVR to your home router with an ethernet cable directly.Purpose: This instruction is used to change the resolution when there is no output from the DVR/NVR, which might be caused you changed the output resolution of the system accidentally. How to Change Display Resolution of System via Computer when here is All Black on the Monitor? Solution: Please provide your relevant purchase information or order information to us in the form of an attachment so that we can provide better help. Just connect the DVR/NVR to a power adapter and monitor/display/TV. Solution: Please do not connect the Ethernet cable to the DVR/NVR. Solution: If you have installed a hard disk drive(HDD) on DVR/NVR, please uninstall the HDD to have a try. How to install a hard disk drive(HDD)?Ĭause 6: The Ethernet cable may have some problem How to change the display resolution of DVR/NVR via computer?Ĭause 5: The Hard Disk Drive( hdd) maybe has some problem Solution: Please use SADPTool software to search the DVR/NVR and change its resolution on the computer. Solution: If possible, please use another monitor/display/TV to have a try.Ĭause 4: The resolution of DVR/NVR is higher than the monitor/display/TV Once you have selected the channel in your RF Modulator and tuned into the same channel in your TV you should see all your cameras in that channel as well as Adapter only if you have installed the optional Adapter splitter or selected the Adapter out from your DVR.Cause 3: The monitor/display/TV may have some problem or it is not compatible with DVR/NVR You can highlight each channels to see the channel strength after that you can hit “DONE”, then you can press “CANCEL” twice to exit the menu, finally go into your guide and search the channel that the RF Modulator is on, Channel 65 or a channel that is not being used by any station is required since those channels will cause interference. Power up your Satellite Receiver and go to the Menu by pressing the menu button in your remote then select option 6 which is “System Setup”, go to option 8 “local Channels” on the new window select local channels, select “Scan Locals” your receiver will now scan your local channels, the local channels that the receiver found will not be displayed on the left of the screen. Searching for your local channels after the connections are made Once you have done this you are done when it comes to making all connections the rest is done via the on screen settings in your receiver. “Y” RCA Splitter / Adapter RCA SplitterĬonnecting the Satellite Receiver is very simple, on Illustration 5 connect SAT Cable from the first diplexer we already installed to the top in/out ‘A” on the diplexer after that connection is made connect the antenna to the TV in/out on the diplexer “C” and finally connect “B” Sat in/out to the Sat in on the Satellite receiver.Perfect Vision PVDP2 Diplexer Dual Satellite Dish TV Antenna Combiner (PVDP2) Note* Any Satellite Diplexer should work, Perfect Vision Diplexer is prefered.You can also view it in your kitchen while you are cooking as long as the TV is connected to the same system either on a satellite system or a cable system. So you got yourself a Security Camera System and you have your DVR setup either in your bedroom or in the garage and every time you have company or hear a noise outside your home you have to pull out that mobile device and run an application or go where your DVR is located to view those cameras, Here is the solution to that problem so you can view these cameras in all your TV’s just by going to a specific channel on any TV in your home, now you aren’t going to have the ability to change any settings but having the image in all your TV’s gives you peace of mind and it’s a simple shortcut that saves time since you aren’t going to have access to your mobile phone at all times or have the ability to go to the DVR’s monitor.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |